Bourne Lock maintenance…

Maintenance
Phase 3

Lock Maintenance – Bourne Lock/Record Sluices

by: Frank L.

A request came in over the weekend from Les Richards who is a SVCC co-ordinator to see if we could help at Bourne Lock after the Thursday SDC volunteers had cleared trees and undergrowth very recently. Jet washing the coping stones on the lock chamber edges was the task, as they were covered in moss and a slip hazard. As yesterday was bright and breezy a team of 3 was assembled. Andy P, Maurice W, and myself.

On the way there, another task had been allocated by WD to check the Ryeford Sluices for debris.  Some was cleared, but with high flow rates, it is difficult to do a 100% job.  A tree was seen jammed against one set of Sluices, and will take some shifting.

So we pushed on to Brimscombe, where Bourne lock is – just on the Eastern side of the port.
I knew water would not be in short supply, but we did have to use the bucket and rope trick hauling it up from the lock chamber to fill our dust bin reservoir. This feed the Karcher jetwasher which is ideal for this type of job with the correct lance head.  Two hours, and we were done.  Rather wet and dirty, but satisfied with the result, as were some of the towpath travellers.

Tree trunk just under water jammed against the sluices at Ryeford

Latest News